It jumps to contents.

Introduction to Ku-band VSAT KU-100

Features of KU-100

  • Light-weight radome that achieves enhanced resistance to vibration
  • Ease of maintenance achieved by intelligent internal design layout
  • A wide range of interface options for modems available, compatible with both iDirect and ViaSat
  • Real-time monitoring of the antenna status available from a remote location

Download The Brochure(PDF)

System configuration of Ku-band VSAT

Antenna Unit


Antenna Unit KU-100AT
Antenna DiameterDish size: 1.0 m
Antenna GainTransmission41.8 dBi at 14.25 GHz
Reception40.6 dBi at 12.50 GHz
CO/X-POL (option)
Transmitting Frequency14.0-14.5 GHz (STD)
13.75-14.5 GHz (option)*
Receiving Frequency10.95-12.75 GHz (STD/option)
RF PackageTX8 W BUC (Block Up Converter)
8 W Extended BUC (option)
RXWideband LNA
GPS ReceiverIncorporated
Ship's MotionRoll±30°/7 sec
Pitch±10°/5 sec
Yaw±4°/20 sec
Rate of Turn±6°/1 sec, 1°/sec²

*Extended BUC reguired

Antenna Control Unit


Below Deck Unit
Antenna Control Unit KU-100AC
InterfaceAntenna Interface (Power, L-band with control),
TRX IF (for Modem),
Ethernet, Heading, RS232 (for maintenance)
Power Supply100-240 VAC (50, 60 Hz),300 W
EMCIEC 60945 Ed. 4 2002-08
ShockIEC 60068-2-27
VibrationIEC 60945 Ed. 4 2002-08
TemperatureOperationalADE: -25 to +55°C, BDE: 0 to +55°C
Storage-40 to +70°C
Humidityup to 93 % at 40°C
Wind Speed60 m/sec Max.

Satellite Router

iDirect 5100
4.6 kg 10.1 lb

Satellite Router iDirect 5100
SatCom InterfaceTX-IF: Type-F, 950-1700 MHz, +7 to -35 dBm
RX-IF: Type-F, 950-1700 MHz, 0 to +65 dBm
Data InterfaceLANSingle 10/100 and 8-port 10/100 Switch, *
802. 1q VLAN
(for GPS or Console connection or Antenna Pointing)
Power Supply100-240 VAC, 50/60 Hz, 1.32 A max (90 VAC),
0.53 A max (254 VAC)

* One LAN port must be interfaced with KU-100AC.

Uninterruptible Power Supply

17 kg 37.48 lb

System TopologyHybrid
Output Power700 W/1000 VA
Voltage230 VAC100 VAC
Frequency50/60 Hz±8%
Battery TypeMaintenance free sealed lead-acid battery
Battery Backup Time5 mins
Operating Temperature0 to 40°C
Humidity20 to 90 %

VoIP Switch

AFG 200/400/800
0.6 kg 1.32 lb

The AFG VoIP Switch series is intended for applications interfacing between the PBX and the VoIP network. The number of VoIP ports corresponds to the number of FXS ports available.

VoIP SwitchAFG200AFG400AFG800
FXS Ports248
FXO Ports000
VoIP Ports248
Voice AlgorismG.723.1a, G.729ab, G.711 Auto codec negotiation
FAX SupportT.38 (ITU-T) and G3 at 2.4, 4.8, 7.2, 9.6, 14.4 kbps
Echo CancellerITU Rec. G168, up to 128 ms
IP OptionsDHCP Client
InterfaceRJ-11 for analog telephones,
10/100 Base-T RJ-45 LAN Interface
Power Supply10-240 VAC, 56/60 Hz 22 W

To the top on this page